Tetrative brings electronic hardware, FPGA/ASIC design, embedded software and systems engineering together under one roof. Our team designed flight equipment and test equipment at every stage, from prototype through engineering and flight models, then moved from equipment to system level: satellite integration, environmental and functional system tests, launch campaigns, commissioning and acceptance tests, and support for in-orbit operations.
Spacecraft Systems Engineering
- Mission and system requirements, architecture trade-offs, interface control documents
- Space-segment work-package leadership, including a geostationary communications satellite
- ECSS-based engineering (E-ST-10, 20, 40, 50, 70)
- Design reviews from concept through flight-model acceptance
Electronic Hardware Design
- On-board computers, satellite management units, payload controllers
- Processor, SoC/SoM, FPGA and ASIC-based units; SDR and RF front-ends
- Motor-drive, analog measurement and power-conditioning electronics
- Rad-hard, rad-tolerant and COTS designs with SEL protection (LCL)
- High-speed PCB, signal integrity and EMC
FPGA & ASIC Design
- FPGA architecture, RTL design (VHDL/Verilog), SystemVerilog/UVM verification
- IP cores: SpaceWire/RMAP, MIL-STD-1553B BC/RT, CAN, HDLC, CCSDS TM/TC
- Soft processors (LEON, RISC-V) with AMBA peripherals
- SDRAM, DDR, NAND Flash and MRAM controllers with EDAC and scrubbing
- GNSS baseband and signal/image-processing accelerators; Reed-Solomon codecs
Embedded & Flight Software
- OBC/SMU flight software: data handling, thermal, power, payload and AOCS tasks
- NASA cFS (core Flight System) integration and ESA PUS (Packet Utilisation Standard) services
- Bootloaders, BSPs and drivers on VxWorks, INTEGRITY, RTEMS, QNX, ThreadX, FreeRTOS, real-time Linux
- GNSS acquisition and tracking (FLL/PLL/DLL), Kalman filtering, PVT
- Fault-tolerant bootloaders: redundant memory selection, multi-level reset, independent warm restart of multi-processor units
- High-throughput flight file systems, compression and encryption libraries
- SIL/HIL simulators, CI pipelines, static and dynamic analysis
Mission support
AIT, test and operations on LEO and GEO satellites
We have been on the cleanroom floor, at the launch site and in the control room. Our team integrated and tested flight computers on both LEO and GEO satellites and took part in their commissioning, and still supports their flight software in orbit.
Assembly, Integration & Test
- Unit, subsystem and system-level integration of the flight computer with every on-board unit: gyros, star trackers, sun sensors, reaction wheels, propulsion, cameras, power and RF
- EMI/EMC and thermal-vacuum test campaigns on engineering and flight models
- Functional and performance testing, thermal-vacuum and launch-site campaigns abroad, pre-launch checkout
- Custom EGSE, SCOE and test racks
Commissioning & In-Orbit Operations
- Satellite commissioning (LEOP) and in-orbit acceptance tests
- Satellite operator training and on-call support for end users
- Flight-software support during routine operations
- In-orbit debugging: finding and fixing anomalies on spacecraft already flying
- In-orbit software updates: patches, new uploads and new features added to units in orbit
- In-orbit performance analysis: bus load, telemetry budgets, measured SEU rates and memory-protection effectiveness
- Long-term sustaining engineering for operational satellites
Ground Station & Test Software
- Ground test software for flight computers: CCSDS TM/TC, PUS, CFDP file transfer, bootloader and software-upload protocols
- CCSDS COP-1 link protocols (FOP/FARM) between spacecraft and ground
- Command & control, test automation, scripting and telemetry visualisation built on open-source mission control frameworks
- Bus test tools: MIL-STD-1553B, CAN, SpaceWire/RMAP and Modbus master/slave/monitor applications
- Satellite software simulators on Linux, software-in-the-loop and hardware-in-the-loop
- Ground station control software
Interfaces we work with
- MIL-STD-1553B · SpaceWire/RMAP · CAN / CAN-FD
- RS-232/422/485 · SPI · I²C · LVDS
- Ethernet (TCP/IP, UDP) · PCIe · RapidIO · SerDes
- CCSDS TM/TC
- Discrete: HPC, LPC, BSM, BDM, ASM, TSM
HPC/LPC = high/low-power pulse commands · BSM/BDM = bi-level switch/discrete monitors · ASM = analog signal monitor · TSM = thermistor signal monitor.
Consulting & Training
Learn from engineers who have flown it
We help organisations modernise and optimise existing platform equipment and speed up new programmes. We also run hands-on courses:
- FPGA design and verification for space
- Embedded RTOS development, BSPs and bootloaders
- Flight software architecture (NASA cFS, ESA PUS)
- GNSS receiver design
- Mission assurance and ECSS-based V&V
Need a hand on your programme?
From a single IP core to a full flight computer, or a week of support at the launch site, tell us what you need.